Major firmware update for the SIGMA fp | Ver.4.00
Thank you for purchasing and using our products.
We would like to announce that a new firmware update Ver.4.00 for the full-frame mirrorless camera, SIGMA fp is now available.
[Applicable product]
SIGMA fp
[Benefits of the update]
Ver.4.00
・It adds the “False color” function where the exposure status on the screen is displayed in different colors, allowing users to easily see the exposure status of any part of the frame.
・It adds the “Focus Ring Control” function that allows users to change the movement of the focus ring to either linear or nonlinear.
* 1 Only for compatible lenses.
* 2 To use this function, it is necessary to update the firmware of the compatible lens to the latest version.
・It adds the “STILL / CINE Link Settings” function that allows users to select whether or not they want to link key exposure settings between STILL and CINE modes.
* The following settings are affected: Shooting Mode, Shutter Speed, Aperture, Exposure Compensation, ISO Sensitivity.
・It allows the “Screenshot” and “False color” functions to be assigned to “Custom button functions”.
・It changes the specification so that the countdown before a shot in self-timer mode (2 seconds and 10 seconds), and the exposure time for long exposures (bulb shooting and exposures of 1 second or longer) are displayed on screen.
・It adds a function available in STILL mode where information from the attached lens (focal length and shooting distance) can be displayed on screen.
・It adds a “Clip Numbering” function in CINE mode that allows users to change the clip numbering of the “File name / Number” in the “SYSTEM” menu.
To update the firmware, please refer to the following link:
https://www.sigma-global.com/en/cameras/fp/?tab=support&local=firmware
【For Blackmagic Design Video Assist 12G Series users】
Blackmagic RAW recording using the HDMI output of SIGMA fp updated to Ver.4.00 may not perform correctly without updating the Video Assist firmware. This issue has been corrected in the “Video Assist 3.5.2 Update” released by Blackmagic Design Pty Ltd on February 16, 2022, so please update your software accordingly.
【About instruction manual 】
The latest version of the instruction manual (PDF format) that supports this firmware update can be downloaded from the following URL.
https://www.sigma-global.com/en/cameras/fp/#catalog
[Contact]
For further information, please contact your local authorized SIGMA Service Station listed at the link below:
https://www.sigma-global.com/en/world-network/
We appreciate your continued support for SIGMA products.